1
Customs / Re: BlasTech DH17 Blaster Project
« on: August 20, 2011, 04:29:16 PM »
The hardest part was the fact that it was built by eye and with no measurment references (I couldn't find any in my searches). The only thing I found was the length of the Master Replicas model at 18.9". I used crude math to figure out placement of all the parts. I do admit there was a few more sources of materials: WalMart USA for the rifle scope mounts and Michael's for the Sculpy for the hand grips. The nice thing about using hardware items, the PVC, wood and copper give it a good feel and weight. The trigger is a large brass plant hook, so, no, it does not move. It's threaded into the pine handlegrip and is very solid.
Here's a link to the construction photos:
http://s104.photobucket.com/albums/m181/grandmoffrob/DH17%20Blaster%20Construction/
Here's a link to the construction photos:
http://s104.photobucket.com/albums/m181/grandmoffrob/DH17%20Blaster%20Construction/