- Star Wars collecting news and information in Canada.

Please login or register.

Login with username, password and session length
Advanced search  


Looking into the forum errors


Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Darth Woo

Pages: 1 [2] 3
Customs / Kylo Ren
« on: March 22, 2016, 02:13:11 PM »
So, here's all the Kylo Ren looks I can get with the Walmart BS Ren.  Unfortunately, it required 3 figures and none of them use the head that came with the Black Series Ren because of how they sculpted helmet and head as one piece. :(

Using unmasked hood with Armor up head.

Now he pulls down his hood. :)
It's the Armor up head and hood/scarf

Now he takes off his helmet.  Unfortunately, I have bad lighting in my place so you can't see his face with the flash.

Of course, then Ren will just throw his helmet away and you get this look

And then he eventually gets rid of his scarf

Customs / Stormtrooper Officers
« on: December 09, 2015, 04:50:50 PM »
Originally, I couldn't pony up for the Amazon set and wanted a Stormtrooper Officer.  Both are made using SDCC Stormtroopers and Snowtrooper Officer pauldrons.

All I did was trim the front piece of the pauldron smooth so it looks like the Stormtrooper Officer's.  Because the pauldron's are white plastic painted over, for the white one, after trimming, I just took acetone and just wiped off all the red paint and touched up on the black areas.

With my 1 retail Stomtrooper

However, thanks to the member for posting that it was available on, I managed to get a friend to get me a set.  When that comes in, then I'll convert the orange pauldron Stormtrooper Officer to a black one so I'll have one of each colour.

Looking for the following:

BD42 - dark bearded Hoth Trooper
Both Rebel Soldiers from the Defense of Hoth sets
VC68 - Echo Base Rebel Trooper

Customs / FO Snowtrooper
« on: October 26, 2015, 12:35:17 PM »
Finally got my second one so I took the pauldron off.  Will put it on a SDCC Stormtrooper once I get him in the mail.

As for the Snowtrooper, once you remove the pauldron, his unpainted neck becomes very apparent whereas with the pauldron, it hides that it's unpainted unless you look under his chin.

So I painted the neck on my non-officer one.

Customs / TFA FO Elite Stormtrooper Scout
« on: October 15, 2015, 07:03:47 PM »
I have updated the FO Elite Scout. 
I cut off the holster from the actual Elite Stormtrooper's leg and cut up my General Weir's leg a little and bascially modded the holster onto it.  Now I'm actually really happy with him and he's now my FO Elite Scout Trooper.  The strap on the leg works perfectly as it makes it look like the holster part is strapped on with the strap as the actual FO Stormtroopers have armor there with the holster being part of the armor.

Close up of the holster

I love Speeder Bikes so when the FO Speeder Bike was revealed, I was really happy.  Only wish the trooper had more articulation.

I took my leftover parts from my General Weir and put some of the Elite Stormtrooper stuff on him.  Now I have an SA Trooper to ride my FO Speeder Bike.

Sorry the lighting isn't too good in the pics

On the bike:

Customs / Captain Rex
« on: April 17, 2015, 12:22:33 PM »
I quite like the new Black Series Captain Rex.  I didn't really like how small the head was though so I modified it so I can use the Clone Wars Phase 2 head which I hollowed out.  The only Rex head available unfortunately is the cartoon one.  At least the helmet looks realistic.  I do miss the ball jointed torso though.  Too bad Hasbro didn't just use the Fordo body and make him in that same manner.  For now this will have to satisfy me for Rex.

Customs / 6" Shadow Stormtrooper mods
« on: December 15, 2014, 06:00:45 PM »
I really wished Hasbro gave him a holster for his blaster.  I managed to modify the holster that came with Han Solo onto my Shadow Stormtrooper.  The downside though is that if I want to army build him, I'd need to get that many Han Solo's (or at least the Stormtrooper belt that came with him).

He can now hold everything he came with.

Customs / ESB Boba Fett
« on: December 06, 2013, 12:16:41 PM »
I finally got what I needed to finish my Boba Fett.  The thing I hated about the VC09 Boba Fett was his helmet was too small and his backpack kept falling off.  Now that I have the Slave1, I wanted his viewfinder to be movable as well as he has it down when piloting the Slave 1.  Now I can have that.

I took the Bespin 3 pack Fett's helmet and hollowed it out, and then added the viewfinder from the VC09 ROTJ Fett.  To fix the backpack, I used the Bespin 3 pack Fett's backpack as well and did some black paint wash on it to dirty it up.

In Slave 1

Customs / Black Series Vader
« on: August 30, 2013, 03:50:56 PM »
I bought this for Han's blaster and ended up really liking the Vader so I decided to mod it a bit.  Took a few tries but finally got his chain to not dangle down with creative use of his breast plate. I also cut the hand off a Bespin 3 pack Vader and modded it so now he has a right hand that can hold his Saber.

Customs / ROTJ Endor Luke
« on: July 03, 2013, 12:54:40 PM »
I wanted an Endor Luke and the Death Star Luke from the VC line was perfect for it.  The only problem was the head was a little big for the helmet.  Also, I wanted to use the DS Luke head on the deleted scenes Luke so that his hair would be parted the correct way.  I managed to get an Endor Luke head from the Saga Collection and I modified it to fit on the DS Luke body.  Now I got an Endor Luke that can fit the helmet properly.

Customs / realistic CW Anakin with space gear
« on: June 20, 2013, 04:33:41 PM »
Here's one of those 5 minute customs.  Added a hole in the back and put the backpack and helmet on and now I've got a realistic style Anakin with space suit.  All the gear was taken from the animated version.  Taking and posting the pics probably took longer than the time I spent making this...haha.

Customs / Fetts and Vader updates
« on: June 20, 2013, 12:01:55 PM »
I found the Bepsin pack on discount for $11.  Now I managed to use that pack to fix some of my other figures.

I really like the removable helmet Boba Fett, but the helmet was too small and the jetpack kept falling off.  I drilled out the head from this pack and gave Fett the backpack from this one and now I am happy with my ESB Fett.  I also shortened his cape.

I have the Legacy 2-piece helmet Vader, but I hate how his right hand can't hold his saber.  I cut off the hand of the Bespin pack Vader and modified it to fit my Legacy Vader and now he can hold the saber in his right hand.  The hand can still swivel.

I really love the Evolutions Jango Fett, but there were a couple of things I didn't like about it which I was hoping the new version would fix.  One being the holsters not having the thigh straps and the other was having the backpack with the projectile. 
Well, Hasbro fixed one thing but not the other, so I've finally given up and just modified mine.

Backpack is from the Kamino escape Jango Fett.  The holster and helmet are from the apartment Jango.

Scout Report / Ewok mulitpack and Yavin pilots pack
« on: May 06, 2013, 05:39:13 PM »
$29.98 at TRU right now.  Wasn't advertised.  I just scanned it and it came out at that price.

Customs / Random Clone Trooper customs
« on: February 25, 2013, 12:24:45 PM »
This is not screen accurate, but I just really wanted a Phase II Rex that is articulated and has a removable helmet.  I hollowed out the helmet and placed it on a nicely articulated Phase I Rex body.

In this first picture, I didn't have the helmet pressed down enough, so you can see a little of his chin.

I fixed it and put it on better now so you don't see his chin at all even from a lower angle shot

From behind, helmet on loosely and the picture below that has helmet on properly.

helmet being placed

Customs / Rebel Fleet Troopers with holsters
« on: May 25, 2012, 12:56:20 PM »
Hated that the RFT didn't have holsters.  However, finally caved in and got 2 the other day.  Also picked up two Yavin cart sets on clearance too.

I used the Yavin tech's holster.  I had some extra parts and made one of the Yavin tech guys a Rebel Fleet Trooper too.  Since the rebels were like a ragtag fleet, then I'm sure some guys might have slightly different uniforms too, or he can just be a different rank.

Pages: 1 [2] 3

Page created in 0.232 seconds with 29 queries.